Partition
Partition Design
Partition
Office Partitions are a build-your-own system, whether you need to create one cubicle or an entire office. Each panel can easily be assembled together through use of steel connectors (sold separately) to form straight runs, 90 degree corners, 4 way cubicles and high-low panel configurations. Panels come in blue or gray fabric options in varying widths and heights
Types of Partition
- Gypsum Board Partion
- Aluminium Partition
- Brick partitions
- Hollow block partition of clay, terracotta or concrete
- Glass partitions
- Concrete partitions – plain or reinforced
- Metal lath and plaster partitions
- A.C. sheet or G.I. sheet partitions
- Timber partitions
Gypsum board is the generic name for a family of panel products that consist of a noncombustible core, composed primarily of gypsum, and a paper surfacing on the face, back and long edges..
Providing and fixing anodized aluminum work for partitions with extruded built up standards tubular and other sections.
This type of wall is constructed by laying bricks as stretchers in cement mortar. Thus the wall is generally 10cm (half brick) thick and plastered considerably on both faces.
These may be made from sheet glass or hollow glass bricks. In case of sheet glass partitions, sheets of glass are fixed in the framework of wooden .
Metal lath and plaster when properly laid forms a reinforced wall which is thin, strong, durable and is considerably fire resistant.
Partition walls constructed from asbestos cement sheeting or galvanized sheet fixed to wooden or steel members are mostly adopted in works of temporary character.
This type of partition walls consists of a wooden framework either supported on the floor below or by side walls. The framework consists of a rigid arrangement of timber members which may be plastered or covered with boarding etc from both the sides.